Guide to Advanced Construction
Jump to navigation
Jump to search
The page details the construction of "machines", a class of fairly complex objects used aboard the station. The basic process of construction is the same for all machines; only the parts used change.
- Activate a stack of at least 5 metal sheets in-hand.
- Select 'Frame' from the list that appears
- After a short crafting time, frame parts will be on the floor where your character is standing.
- Pick those up and activate them to select the type of machine you are making. (Most things just use the generic Machine frame or computer)
- After making a frame, right click it to rotate the facing if it's a directional machine like body scanners or consoles.
- Use a wrench on it to secure the frame to the floor.
- Insert the circuit board for the machine you are making into the frame. (Get these from R&D.)
- Apply a screwdriver to secure the circuit board.
- Insert wires into the frame.
- You can now examine the frame to see what extra parts the machine needs. (Also get these parts from R&D. You can use upgraded parts for some machines!)
- After inserting all required parts (examining will give a message along the lines of 'Requires nothing'), use a screwdriver on it again.
Some machines can be upgraded by science to make them more efficient.
Machines
| Name | Parts needed | |
|---|---|---|
|
Cloning Pod |
2 Pieces of Cable 2 Manipulators 2 Scanning Modules 1 Console screen |
|
Cloning Scanner |
2 Pieces of Cable 1 Manipulator 1 Scanning Module 1 Console screen 1 Micro laser |
|
Autolathe |
2 Pieces of Cable 1 Manipulator 3 Matter bins 1 Console screen |
|
Protolathe |
2 Small beakers 2 Manipulators 2 Matter bins |
|
Deconstructive Analyser |
1 Manipulator 1 Scanning Module 1 Micro laser |
|
Circuit Imprinter |
1 Matter bin 1 Manipulator 2 Small beakers |
|
Subspace Broadcaster |
1 Pieces of Cable 2 Manipulators 1 subspace crystal 1 subspace filter 2 High-powered Micro laser |
|
Subspace Receiver |
2 Manipulators 1 Scanning Module 1 Micro laser 1 subspace filter 1 subspace ansible |
|
Exosuit Fabricator |
1 Manipulator 2 Matter bins 1 Console screen 1 Micro laser |
| File:Rndserver.png | RnD Scanner |
2 Cable coils 1 Scanning module |
|
Telecoms Hub |
2 Pieces of Cable 2 Manipulators 2 Subspace filters |
|
Telecoms Bus |
1 Piece of Cable 2 Manipulators 1 Subspace filters |
|
Telecoms Relay |
2 Pieces of Cable 2 Manipulators 2 Subspace filters |
|
Telecoms Server |
1 Piece of Cable 2 Manipulators 1 Subspace filter |
|
Telecoms Processer |
2 Pieces of Cable 3 Manipulators 1 Subspace filter 2 Subspace treatment 1 Subspace analyzer 1 Subspace amplifier |
|
P.A.C.M.A.N.-type portable Generator |
2 Pieces of Cable 1 Micro-laser 1 Matter bin 1 Capacitor |
|
S.U.P.E.R.P.A.C.M.A.N.-type portable Generator |
2 Pieces of Cable 1 Micro-laser 1 Matter bin 1 Capacitor |
|
Cyborg Recharging Station |
2 Capacitors 1 Power Cell 1 Manipulator |
|
Gas Cooling System |
1 Matter bin 1 Manipulator 2 Capacitors 2 Pieces of Cable |
|
Gas Heating System |
1 Matter bin 1 Manipulator 2 Capacitors 5 Pieces of Cable |
|
Biogenerator |
1 Matter bin 1 Manipulator |
| File:Borgcharger.png | Borg Recharger |
2 Capacitators 2 Manipulators 1 Power cell 5 Pieces of cable |
Guide Table 
| ||||||||
| Starter | VORE-Specific | Medical | Engineering | Science | Security | Other | Development | |